GFC-Y01 YAMAHA Feeder Storage Cart
GIC-Y01 YAMAHA FeederCalibration JIG
It is essential for thisequipment that enhanced productivity , installation and quality improvement
As the high efficiency visioncamera is asked in order to investigate precisely and repair the error ofdevice position which results from the modification and wear of tape feeder inthe SMD device.
The Feeder, which suppliesresources in the SMT production line, should be under clear conditioncontinuously because it has relatively close correclation with the quality of acurrent line, production efficiency and loss
Convenience in use---------
The acquisition for therectangular coordinate of X-Y direction.
Check for the existence,transformation, user in the feeder
The installation is to euip itwith actual device and consolidation in feeder base
Lens` safe arrival part, CCDCamera, the precise micro controller of X, Y, Z axis
The automatic (orsemi-automatic), IC transfer device can move IC to the specific area(point)
The simple calibration forremoving or taking feeder easily
It is correction as measurementwith CCD Camera.
Timer control make it pssible tochange the IC pick-u time.
The use pressure is able to controlin the regulator and air cylinder.
Verification and correctionavailable worker`s convenience and well carriage by the work desk.
Monitor : 12” LED display, withcross mark
Camera : CCD, 50 timesmagnification
Object of Feeder YV88 /YV100 / YV180 / YV100X YG series / YV100ii / YV180 XG