Home > PRODUCT > Product List > SMT PARTS > SIEMENS > Feeder calibration

GIC-SE01 SIEMENS Feeder Calibration JIG

GIC-SE01 SIEMENS FeederCalibration JIG

It is essential for thisequipment that enhanced productivity , installation and quality improvement

As the high efficiency visioncamera is asked in order to investigate precisely and repair the error ofdevice position which results from the modification and wear of tape feeder inthe SMD device.

The Feeder, which suppliesresources in the SMT production line, should be under clear conditioncontinuously because it has relatively close correclation with the quality of acurrent line, production efficiency and loss

Convenience in use---------

The acquisition for therectangular coordinate of X-Y direction.

Check for the existence,transformation, user in the feeder

The installation is to euip itwith actual device and consolidation in feeder base

Lens` safe arrival part, CCDCamera, the precise micro controller of X, Y, Z axis

The automatic (orsemi-automatic), IC transfer device can move IC to the specific area(point)

The simple calibration forremoving or taking feeder easily

It is correction as measurementwith CCD Camera.

Timer control make it pssible tochange the IC pick-u time.

The use pressure is able to controlin the regulator and air cylinder.

Verification and correctionavailable worker`s convenience and well carriage by the work desk.


Overall size  500 x 350 x550 mm , L x W x H

Type  Electric

Monitor : 12” LED display, withcross mark

Camera :  CCD, 50 timesmagnification

Object of Feeder  SIEMENS Sseries

TEL:0769-33355254 |

Address:2rd Floor, D Building, JinJinBi Industrial Park , West City Hengli Village , Dongguan City